» Download Article
A Case Study of a Flexible Software Tool in the Drilling Process
Embedded Systems, Computational Intelligence and Telematics in Control, Volume # | Part# 1
Authors
Portillo Perez, Eva; Cabanes, Itziar; Sanchez Galindez, Jose Antonio; Orive, Dario; Ortega, Naiara; Marcos, Marga
Digital Object Identifier (DOI)
10.3182/20120403-3-DE-3010.00025
Page Numbers:
333-338
Index Terms
Process control, manufacturing
Abstract
The drilling process is one of the most extended machining processes in the manufacturing industry. However, the performance of this process can be importantly decreased due to the drill wear and even breakage. Concerning this, this paper presents a flexible software tool that provides the user of the drilling machine with information about the current regime of the drilling process. In particular, the application provides information related to the occurrence of both tool wear and material heterogeneities.
References
Abele, E., Ellermeier,A., Hohensteing,J., Tschannerl,A.(2007). Tool length influence on wear behavior of twisted carbide drills.Production Engineering, 1, 51–56. Gajate,A., Haber,R. (2009). Control neuroborroso en red. Aplicación al proceso de taladrado de alto rendimiento. Revista Iberoamericana de Automática e Informática Industrial, 6 (1), 31-38. Govekar, E., Grabec, I. (1994). Self-organizing neural network application to drill wear classification.Journal of Engineering for Industry, Transactions of the ASME, 116 (3), 233–238. Haber-Haber, R., Habera, R., Schmittdiel, M., del Toro, R. M. (2007). A classic solution for the control of a high-performance drilling process.International Journal of Machine Tools & Manufacture, 47, 2290–2297. Hayashi,S.R., Thomas,C.E., Wildes,D.G. (1998). Tool break detection by monitoring ultrasonic vibrations.Annals of the CIRP, 37 (1), 61–64. Jantunen,E.(2002).A summary of methods applied to tool condition monitoring in drilling.International Journal of Machine Tools & Manufacture, 42, 997–1010. Li,X. (1999). On-line detection of the breakage of small diameter drills using current signature wavelet transform.International Journal of Machine Tools & Manufacture, 39 (1), 157–164. Schehl,U. (1991). Werkzeugu¨berwachung mit Acoustic-Emission beim Drehen, Fräsen und Bohren.Ph.D. ThesisAachen.