Distributed model predictive control of a four-tank system
Advanced Control of Chemical Processes, Volume # 6 | Part# 1
Authors
Mehmet Mercangoz, Francis J. Doyle
Identifier
None
Index Terms
distributed decentralized estimation and control,model based control,network control,plantwide control
Abstract
A distributed model predictive control (DMPC) framework is proposed. The physical plant structure and the plant mathematical model are used to partition the control duties over self-sufficient estimation and control nodes. Linear models and local measurements at the nodes are used to estimate the relevant plant states. This information is then used in the model predictive control calculations. Communication among relevant nodes during estimation and control calculations provides improvement over the performance of completely decentralized controllers. The DMPC framework is demonstrated for the level control of an interacting four-tank system. The performance of the DMPC system for disturbance rejection is compared with other control configurations. The results indicate that the performance of the proposed framework provides significant improvement over completely decentralized MPC controllers, and approaches the performance of a fully centralized design.
References
[1] Findeisen, W., Brdys, M., Malinowski, K.,
Tatjewski, P. and Wozniak, A. (1980). Control
and coordination in hierarchical systems, Wiley
Inc., New York, NY.
[2] Gatzke, E.P., Meadows, E.S., Wang, C. and Doyle
III, F. J. (2000). Model based control of a four-tank
system. Comput. Chem. Eng., 24, 1503-
1509.
[3] Jia, D., & Krogh, B. H. (2001). Distributed model
predictive control. In: Proceedings of the
American Control Conference, pp. 2767-2772.
Arlington, VA.
[4] Mutambara, A.G.O. (1998). Decentralized estimation
and control for multisensor systems, CRC Press,
Boca Raton, FL.
[5] Siljak, D.D. (1991). Decentralized control of
complex systems. Mathematics in Series and
Engineering, 184, Academic Press, San Diego,
CA.
[6] Skogestad, S. (2004). Control structure design for
complete chemical plants. Comput. Chem. Eng.,
28, 219-234.
[7] Vadigepalli, R. and Doyle III, F. J. (2003). A
distributed state estimation and control algorithm
for plantwide processes. IEEE Transactions
Contr. Syst. Technol., 11, 119-127.
